Indecision often arises because of a meagre choice. With Efco's brushcutters you will have no concerns.
With such a wide range and high quality of machines even waverers' questions can all be answered. Efco offers top guarantees on power, reliability and engine life.
This is a real plus point;; indeed, the Efco brushcutter petrol-driven engines have been designed specifically for this type of machine and are characterised by high torque even at low throttle. In addition, all Efco brushcutters are fitted as standard with "Tap and Go" heads, which allow the lines to come out with a simple movement, while you work, without your having to stop.
There is no need for indecision, all you have to do is judge the type of vegetation you intend to cut (grass, bushes, undergrowth), weigh up thoroughly the technical data in the catalogue and choose from the Efco series of models to find the most suitable model for your needs.

Please call with us to discuss your requirements and we can advise on the best brushcutter for your individual needs.

We offer a full after sales service on all Efco equipment we sell.

 

Efco Stark 26 TR

The most powerful "small" machine • Emak 2-stroke, 25.4cm/3, 1.2 HP/0.9 kW engine providing more than 600 hours of work • Chrome-plated cylinder • Forged steel engine shaft Comfort and easy maintenance • The rounded shape of the new guard enables the machine to run smoothly on very rough grounds • The start switch is specially positioned to avoid accidental turning off • Simple to start even for beginners without flooding the engine, thanks to the "Primer" and "Lift-Starter", a device that automatically cuts off the starter when the accelerator is fully throttled • Noise limited by the oversized muffler • "Tap and Go" heads as standard equipment so the operator can lengthen the line while continuing work. • Easy access to air filter and spark plug allow even beginners to perform maintenance quickly and easily Safety • Cutter guard complies with EC standards. Supplied with: • Steel Cutting Blade & Nylon Head • Harness, Goggles & toolkit.

Brushcutter with custom build designs even for beginners. Easy to start, maintenance can be performed quickly and easily. Comfortable but strong, they can handle even the most demanding work.

Efcl 8250 IC

The most powerful small machine, equipped with Emak 2-stroke engines, guaranteed for more than 600 hours of work, and supplied with a chromeplated cylinder and forged steel engine shaft.

Reliable and long-lasting engine • Emak 2-stroke, 25.4cm/3, 1.2 HP/0.9 kW engine providing more than 600 hours of work • Chrome-plated cylinder • Forged steel engine shaft • Sintered clutch, to transmit motion efficiently even during extended strain More comfort • Simple to start even for beginners without flooding the engine, thanks to the "Primer" and the "Lift-Starter", a device that automatically cuts off the starter when the accelerator is fully throttled. • Easier to handle, thanks to the use of a new bevel gear with reduced inclination (30 degrees between tube and ground) and a higher grip, allowing the operator to keep arms extended, the upper body erect, thus reducing muscle fatigue • Vibrations reduced to a minimum thanks to engine insulation and 5 self-lubricating bushings on the transmission • Noise limited by the oversized muffler • "Tap and Go" heads as standard equipment so the operator can lengthen the line while continuing work • Easy access to air filter and spark plug allow even beginners to perform maintenance quickly and easily Safety • Seme-acceleration switch and side guard for use with metal blades • Cutter guard complies with EC standards Supplied with: • Steel Cutting Blade & Nylon Head • Harness, Goggles & toolkit

Efco 8400

High Specific power • Emak 2-stroke, 37.7cm/3, 1.8 HP/1.3 kW engine providing more than 800 hours of work • Large fuel tank for extended duty • Oversized clutch for the diameter and width of the friction material • Chrome-plated cylinder, two-ring piston and forged steel engine shaft guarantee greater power and reliability even under very demanding operating conditions Comfort at the highest levels • Model equipped with "Primer" for quick pull starting. • Vibrations reduced to a minimum thanks to engine insulation and 6 self-lubricating bushings on the transmission. Additional vibration dampers on the handle. • No tools required to access the air filter • Noise limited by the oversized muffler • Maximum comfort for the operator is guaranteed by the new handle and 30 degree bevel gear that allow a more upright working position to be enjoyed, thus reducing muscular exertion to a minimum. Safety • Semi-acceleration switch • Cutter guard complies with EC standards • Fuel tank separated from the engine to prevent the mixture from overheating Supplied with: • Steel Cutting Blade & Nylon Head • Harness, Goggles & toolkit.

Professional brushcutters designed to meet any requirement. They combine powerful and reliable engines with all the comfort needed by those who work for many hours.

For full details on any of the Efco range of Strimmers and Brushcutters please e-mail, ring or just drop in. We will be pleased to assist in what ever way we can.